Littlefield
01-09-2008, 09:49 PM
Folks, all are contractors and homeowners are welcome to visit with us this Friday and Saturday at no charge for the Ellijay Roundtable event. Visit www.contractorevents.com for all the details.
Getting close and things are looking up for the Roundtable here in Ellijay!!
So far confirmed: Paul Dinos, Roger Gothorp, Brent from Sawtooth Restoration near Asheville, Beth and Rod, Jim Foley, Dave Knox from near Knoxville, TN is a former Sashco rep, and has been doing application for years. He just ran through 1100 sausages of chinking on his last job! If you come to the show, you'll know what that means!!!
Dave Knox will be bringing a Sashco Snorkeler and some Log Jam with him as well for us to play around with using a chink pump for the first time for many. We'll also have some Albion guns for applying the chink sausages.
Suzanne White from Sansin Co. will be presenting their Wood Science presentation complete with handouts, etc.
I've got our standard 375 CFM compressor we use for blasting, and a couple hundred square feet of sample walls that will have Sansin SDF, Messmers Timberflex, and some paint applied for blasting practice.
I've got several others calling for directions from NC and GA, and should have several local contractors as well, hopefully.
Hope to see anyone that can make it show up!! We'll be having lunch on me right down the street on the square in Ellijay at River Street Grill.
Feel free to call me on my cell with any questions you might have about the event!!
Remember, check out Contractor Events for the scoop on directions, etc for the Workshop...
Getting close and things are looking up for the Roundtable here in Ellijay!!
So far confirmed: Paul Dinos, Roger Gothorp, Brent from Sawtooth Restoration near Asheville, Beth and Rod, Jim Foley, Dave Knox from near Knoxville, TN is a former Sashco rep, and has been doing application for years. He just ran through 1100 sausages of chinking on his last job! If you come to the show, you'll know what that means!!!
Dave Knox will be bringing a Sashco Snorkeler and some Log Jam with him as well for us to play around with using a chink pump for the first time for many. We'll also have some Albion guns for applying the chink sausages.
Suzanne White from Sansin Co. will be presenting their Wood Science presentation complete with handouts, etc.
I've got our standard 375 CFM compressor we use for blasting, and a couple hundred square feet of sample walls that will have Sansin SDF, Messmers Timberflex, and some paint applied for blasting practice.
I've got several others calling for directions from NC and GA, and should have several local contractors as well, hopefully.
Hope to see anyone that can make it show up!! We'll be having lunch on me right down the street on the square in Ellijay at River Street Grill.
Feel free to call me on my cell with any questions you might have about the event!!
Remember, check out Contractor Events for the scoop on directions, etc for the Workshop...